Hill EC-3000 | EVO Temperature Sensor Kit

OFFICIAL HILL AIR ACCESSORIES

Temperature Sensor Kit for EC-3000 | EVO.

Upgrade your Hill compressor with this comprehensive temperature sensor kit. The package includes a new temperature sensor, a tube of silicone gel, and two zip ties.

Installation Procedure

To install, first remove the old temperature sensor. Apply a small amount of silicone gel to the new sensor to facilitate its insertion into the compressor. Once the sensor is in place, connect the wiring and use the zip ties to secure the temperature sensor cable alongside the pressure sensor cable.

If you need to do some maintenance or you just want to save some parts for the future, this is the kit you need!

About Hill

Hill is well known as the leader in hand pumps that produce dry air for PCP airguns, and with the EC-3000 they launched themselves into the world of compressors

It was a product ahead of its time. Not only did it had an adjustable output pressure and automatic shutoff, but was all digital, meaning you could control your fill pressure down to the last PSI or BAR.

Seja o primeiro a avaliar este produto !